RD-185 (RED HOT) Adhesion Promoter 250ml ****no air shipping***

Part Number:RD-185 (RED HOT)
You need to be a registered customer to order this product. Please Login to your account or click here to Register.

RD-185 (RED HOT) Adhesion Promoter 250ml (no air shipping)   for Metal, Glass, Plastics & other Hard to Print Substrates (250 ml)

(hazardous material / no air shipping)

RD-185 is an adhesion promoter for use with UV and LED curable inks when printing on Glass, Metal, Aluminum, Plastics & other hard to print substrates. RD-185 is suitable for both interior and exterior applications.

Application Instructions for UV and LED Curable Inks:

  1. Wear protective gear including Latex or Nitrile gloves and safety glasses
  2. Use in a well ventilated area
  3. Apply RD-185 to the substrate with a clean lint free cloth with consistent application covering the full surface of area to be printed and insuring no voids.
  4. Load the RD-185 prepared substrate into the printer and print image using
    UV or LED curable ink

Special Instructions

  1. It may be necessary to wipe off any film or haze from the product caused by RD-185 primer after it is printed.

Recently Viewed Items