MG-347 is an adhesion promoter for use with UV and LED curable inks when printing on Glass, Metal, Aluminum & other hard to print substrates. MG-347 is suitable for both interior and exterior applications.
Application Instructions for UV and LED Curable Inks:
- Wear protective gear including Latex or Nitrile gloves and safety glasses
- Use in a well ventilated area
- Apply MG-347 to the substrate with a clean lint free cloth with consistent application covering the full surface of area to be printed and insuring no voids.
- Load the MG-347 prepared substrate into the printer and print image using
UV or LED curable ink
- It may be necessary to wipe off any film or haze from the product caused by MG-347 primer after it is printed.